Embossed GL
Embossed GL, also call Embossed diamond GL
Definition:
Embossed PPGI is the product prepared via being color-coated and applied to produce embossed patterns on GL.
Application:
It is extensively applied as indoor decoration panels because of its good stereoscopic impression.
Prvided specification:
It is not limited by coating types. But the substrate thickness is normally no more than 0.60mm as it may make the metal hard to deform.
Specifications | |||||||||||||||||||||||
Thickness |
0.14-0.6 mm |
||||||||||||||||||||||
Width |
600-1300 mm |
||||||||||||||||||||||
Zinc Coating |
40-120g/m2 |
||||||||||||||||||||||
Single weight |
3-10 tons |
||||||||||||||||||||||
Coil ID |
508/610 mm |
||||||||||||||||||||||
Thickness Tolerance |
±0.02mm |
||||||||||||||||||||||
Width Tolerance |
±0.2mm |
||||||||||||||||||||||
Certificate |
ISO9001:2008, ISO14001:2004, OHSAS18001:1999, SGS, BV |
||||||||||||||||||||||
Steel Grade |
SGCC, DX51D, DX52D, DX53D,ASTM, DIN, GB, JIS |
||||||||||||||||||||||
MOQ |
25 T |
||||||||||||||||||||||
Payment terms |
T/T or L/C |
||||||||||||||||||||||
Delivery time |
Within 30 working days after receiving L/C or 30% deposit of T/T |
||||||||||||||||||||||
Production Lines | |||||||||||||||||||||||
Project |
GL production line 1 |
GL production line 2 |
|||||||||||||||||||||
Max Speed |
150-170 meters per minute |
180-200 meters per minute |
|||||||||||||||||||||
Capacity |
0.2 million tons(planned) |
0.25 million tons(planned) |
|||||||||||||||||||||
Year of operation |
2010 |
2011 |
|||||||||||||||||||||
Composition | |||||||||||||||||||||||
Zn+Al |
C |
Si |
Mn |
P |
S |
N2 |
|||||||||||||||||
98 |
0.100 |
0.200 |
0.400 |
0.100 |
0.045 |
0.002 |
|||||||||||||||||
As |
Ti |
Cr |
Mo |
Nb |
B |
||||||||||||||||||
0.020 |
0.300 |
0.019 |
0.001 |
0.001 |
0.0001 |
||||||||||||||||||
Mechanical Property | |||||||||||||||||||||||
Tensile Strength (Rm/Mpa) |
Yield Strength ( |